8
Uni-3 Technical Manual
Key Type is available only when options 2-9 are selected in step 7.
9. Enter a number
1-3
to set the key type, then press
Enter
.
B01-04-02 Key Type
is displayed.
10. Press the
Down Arrow
.
B01-04-03 SSID
is displayed.
11. Press
Edit
. Enter wireless network name. This is case sensitive.
12. Press
Enter
twice.
B01-04 WI-FI
is displayed.
Steps 13-14
are available only when Key type is set as WEP. If Key Type is not set to WEP, skip to step
15.
13. Press
Enter
four times.
B01-04-04 WEP KEY IND
is displayed.
14. Enter a number
1-4
to set the WEP key index, then press
Enter
.
B01-04-05 ENCRYPTION KEY
is displayed.
Table 4. WEP Key Index Parameters
The Encryption Key name in step B01-04-05 varies based on the Security Type selected in step 7.
15. Press
Edit
. Enter the encryption key (case sensitive).
16. Press
Enter
twice.
B01-04 WI-FI
is displayed.
17. Press
Mode
.
14038-0009
WI-FI SET UP
is displayed. Wait 5 seconds before proceeding.
18. Press
Enter
.
14038-0010
WI-FI SET UP
is displayed. Wait 5 seconds before proceeding.
19. Press
Enter
.
B01-04 WI-FI
is displayed. Wait 5 seconds before proceeding.
20. Press
Mode
.
14034-0000
REBOOTING CHECK
is displayed. Wait 5 seconds before proceeding.
21. Press
Enter
.
15029-0001
REBOOT CHECK
is displayed. Wait 5 seconds before proceeding.
22. Power off the scale. Wait 10 seconds before proceeding.
23. Power on the scale. After rebooting,
PLEASE CONFIRM TIME
will display.
24. Press
Enter
.
KEY IN ITEM No.
will display
25. Confirm communication. Scale is ready to resume weighing and labeling.
Number
Encryption Key Type
1
Hex
2
ASCII
3
Passphrase
Table 3. Encryption Key Types
Number
WEP Key Index
1
Key1
2
Key2
3
Key3
4
Key4
Note
Note
Note