•
PRESS
SET
KEY,IT WILL SHOW
PIECE
ON DISPLAY.
•
TO SET
PIECE
, PREE
ACL
&
CL
KEY FROM DISPLAY.
•
PRESS
SET
KEY.IT WILL SHOW
L-LMIT
(LOWER LIMIT) ON DISPLAY.
•
TO SET
L-LMIT
USE KEY PAD
•
PRESS
SET
KEY,IT WILL SHOW
H-LMIT
(HIGHER LIMIT) ON DISPLAY
•
TO SET
H-LMIT
USE KEY PAD.
•
PRESS
SET
KEY.
NOTE: AS YOU PRESS SET KEY, IT WILL AUTO SAVE YOUR ALL CONFIG
SETTING.
FACTORY CALIBRATION
•
PRESS
MODE
&
MT
THEN SWITCH ON THE SCALE, THE DISPLAY WILL
SHOW
PASS.
•
ENTER THE
DEFAULT PASS WARD 8756
USING KEY PAD.
•
PRESS
SET
KEY, IT WILL SHOW
SEG-1
ON DISPLAY.
•
TO CHANGE THE
CAPACITY
OF
SEG-1
,USE KEYPAD TO CHANGE THE
PERTICULAR DIGIT OF CAPACITY.THE DIGIT WILL START BLINKING AS YOU
REACH ON PERTICULAR DIGIT.
•
THE PRESS
SET
KEY AFTER CHANGE THE
SEG-1.
IT WILL SHOW
SEG-2
ON
DISPLAY.
•
TO CHANGE THE CAPACITY OF
SEG-2
,USE KEYPAD TO CHANGE THE
PERTICULAR DIGIT OF CAPACITY.THE DIGIT WILL START BLINKING AS YOU
REACH ON PERTICULAR DIGIT.
•
THEN PRESS
SET
KEY,IT WILL SHOW
LOAD
ON YOUR DISPLAY.
•
FIRST
PUT
THE
WEIGHT
THAT YOU ENTER
IN SEG-1
& PRESS
SET.
•
THEN
PUT
THE
WEIGHT
THAT YOU ENTER
IN SEG-2
& PRESS
SET.
FIELD CALIBRATION
