7
Backlight, color … etc settings
The display of DuraPANEL 8 is detected as a Display Port monitor.
DuraPANEL 8 support DDC/CI commands for display settings like brightness, contrast, color
luminance, color
temperature.
8
Power Consumption
Test object / condition
Ptyp [W]
Pmax [W]
DuraPANEL 8
15W
20W
9
In rush current
Test object / condition
[A] @24VDC
DuraPANEL 8
~ 100
10
Troubleshooting
Problem
Cause
Solutions
No picture on display
Backlight level set to off
Increase backlight
Panel PC turned off
Turn on the Panel PC
No power cord connected
Apply power
The unit smells burned /
smoke is coming from the unit
There might be something
burned inside
Please do not try to open the
unit. Send it to ISIC A/S for
repair.
11
Servicing the unit
In case that the unit still fails after following the troubleshooting send the unit to ISIC for
repair via our RMA service on our web.
