8
Inflating your banana boat
To open the valve, simply push down the yellow-topped needle spring and turn to the
right while in the down position. The needle spring will
stay down
and the valve will be
open. you can then simply put any power inflator or Shop Vac up to this opening and fill
the trampoline or banana until firm. Once it is firm, quickly remove the inflator and push
down the needle spring and turn to the left - it will pop back up to the closed position.
how much air is the right amount?
In general, the banana boat or water trampoline is full when it is very firm. An adult
should be able to sit on the tube and only sink a couple of inches. Banana boats need to
be full of air and properly maintained for long product life.
Banana Boat Inflation
Two-part Valve
Top screws into bottom half
that is inside tube
Needle Spring
Valve Adapter
you can also use the supplied
valve adapter to help secure the
power inflator to the opening
