8
INSTALLATION AND ASSEMBLY/
INSTALLATION ET ASSEMBLAGE
1:
Firmly, but carefully, connect the plug on the solar
panel with the socket on the top of the umbrella.
Do not pull on wires as doing so may permanently
damage the connections.
2:
Align the notches on the solar panel with the grooves
on the top of the umbrella, hide the plug and wires
insides the hollow space. Turn the solar panel clockwise
to lock into place; do not over-tighten.
3:
Before the first use, ensure the solar panel receives
at least 8 hours of direct sunlight to charge the
batteries.
Step 5
Attach the Solar Panel ( part L ) on the top of Main Umbella ( part A ) .
Step 5
Attach the Solar Panel ( part L ) on the top of Main Umbella ( part A ) .
Step 5
Attach the Solar Panel ( part L ) on the top of Main Umbella ( part A ) .
NOTICE
The solar panel has a protective film to
prevent damage during shipping. Remove
the plastic film on the solar panel. Failure to
remove the film will result in the solar panel
not functioning properly.
ASSEMBLY/
ASSEMBLAGE
