Battery Replacement
1
3
5
2
4
Step 1:Twist counterclockwise and remove the solar
panel from the top of the umbrella.
Step 3: Place the solar panel upside down on a
non-abrasive surface to avoid scratching. Remove four
(4) screws on the bottom case.
Step 5: Carefully replace the bottom case. Align the
screw holes and replace the screws. Do not over tighten
the screws.
Step 2: Pull the plug out of the socket under the solar
panel. Pull by holding the plug, not by pulling on the
wires.
Step 4: Carefully open the bottom case and set aside.
Replace the battery, matching the +/- on the battery with
the +/- on the battery case.
We recommend that you change the batteries in your solar
light umbrella every year or when you feel the light output
is diminished. Use only three (3) AA size Ni-MH 1600mAh
rechargeable batteries from any major retailer.
· Install only new batteries of the same type in your
product.
· Failure to insert batteries in the correct polarity, as
indicated in the battery compartment, may shorten the life
of the batteries or cause batteries to leak.
· Do not mix old and new batteries.
· Do not mix Alkaline, Nickel Cadmium or Lithium
rechargeable batteries.
·
Do not dispose of batteries in
· Batteries should be recycled or disposed of as per state,
provincial and local guidelines.
Tools required: Phillips head screw driver (not included)
