iSMA-B-AAC20 LCD Display User Manual
www.ismacontrolli.com
DMP234en | 1st Issue rev. 4 | 02/2022
page 12 of 23
•
•
•
•
•
•
•
•
5.1.5 IntLine
The IntLine component is used to display and edit the integer variables (integers). The In
slot value may be preceded by a description on the left side (prefix), e.g., the name, as
well as on the right (suffix), e.g., the units.
In order to edit the variables, it is recommended to use the NVIntegerWritable
components from iSMA_platAAC20 kit. To edit the value of the IntLine component, select
true in the Editable slot, and provide the user with write access to the component. To
make sure that the value on the LCD is synchronized with the changes in the
NVIntegerWritable component the
“link
back-
forward”
strategy needs to be applied. There
is a possibility to change the value from LCD by selecting the Set action. To do this, use
the up/down arrow keys to add/subtract the value of the step. The step field value can be
inputted in the application and changed by using keys F1, F2 (multiplying or dividing the
step value by 10).
Figure 8. IntLine component
Slots
The IntLine component has the following slots:
Status:
the current status of the component;
Fault Cause:
indicates the fault cause of the component;
Prefix:
static text displayed before the Numerical value (left-aligned),
In:
the numeric value;
Suffix:
static text displayed after the Numerical value (right-aligned);
Editable:
switch on/off for variables editing;
Auto Run Action:
automatically go to editing set action, without action selection (only
for components which support 1 action);
Min:
minimum value of the variable that can be set;
