iSMA-B-AAC20 LCD Display User Manual
www.ismacontrolli.com
DMP234en | 1st Issue rev. 4 | 02/2022
page 9 of 23
•
•
•
•
Name:
allows to enter the name of the folder; accepts a string value, max. of 21
characters.
5.1.2 TextLine
The TextLine is a component of the static text display on the LCD screen. It accepts up to
21 characters (ASCII base table). If the user adds the component to the application, the
Text slot takes automatically the name of the component, which can be changed any time
by entering any other text.
Figure 5. TextLine component
Slots
The TextLine component has the following slots:
Status:
the current status of the component;
Fault Cause:
indicates the fault cause of the component;
Text:
allows to enter a text shown on the LCD display; accepts a string value, max. of
21 characters.
5.1.3 NumericLine
The NumericLine component is used to display and edit the numeric (float) variables. The
displayed value of the In slot may be preceded by a description on the left side (prefix),
e.g., the name, as well as on the right (suffix), e.g., the units.
In order to edit the variables, it is recommended to use the NVNumericWritable
components from iSMA_platAAC20 kit. To edit the value of the NumericLine component,
select true in the Editable slot, and provide the user with a write access to the
component. To make sure that the value on the LCD is synchronized with the changes in
