iSMA-B-FCU /FCU Hardware
Version 1.1
www.gc5.pl
Page
3
/
37
1
Introduction
This document presents ISMA-B-FCU device hardware information.
1.1 Document change log
V1.1 – iSMA-B-FCU-LL hardware description added
1.2 Safety rules
•
Please note: incorrect wiring of this product can cause its’ damage and may result in other
hazards. Make sure the product has been correctly wired before turning the power ON.
•
Before wiring, or removing / mounting the product, be sure to turn the power OFF. Failure to
do so might cause electric shock.
•
Do not touch electrically charged parts such as the power terminals. Doing so might cause
electric shock.
•
Do not disassemble the product. Doing so might cause electric shock or faulty operation.
•
Use the product within the operating ranges recommended in the specification (temperature,
humidity, voltage, shock, mounting direction, atmosphere etc.). Failure to do so might cause
fire or faulty operation.
•
Tighten the wires firmly to the terminal. Insufficient tightening of the wires to the terminal
might cause fire
.