iSMA-B-LP Room Panel/Modbus
version 1.3
www.gc5.pl
Page 46 / 121
8.3
OCCUPANCY
_
MODE
_
NAME (41703-41705)
For a more user-friendly use, OCCUPANCY_MODE register value is displayed on LCD as a
text instead of numeric value. There are two 32-bit registers assigned with two different
occupancy modes, which can contain up to 4 characters according to the ASCII code (see
example in
Temperature Name
). The value of 32-bit register is displayed on 8-segment
display block as a text. In case when particular ASCII code value is 0 (NULL), the character is
not displayed. Lower case characters are automatically changed into upper case characters.
Register address
Default name
Corresponding Occupancy mode
register value
41703
UNOC
0
41705
OCC
1
Table 24 Occupancy Mode Name registers
8.4
OCCUPANCY
_
CONFIGURATION (41707)
8.4.1
OCCUPANCY
_
VISIBILITY (Register 41707, bit 0)
Bit 0 of register 41707 is responsible for activation or deactivation Occupancy Current
Status visibility. If bit 0 is active, Occupancy Current Status is visible as a specific group of
Icons
’
configuration.
Figure 20 Occupancy Current Status Icons
The default value is 1 (occupancy mode is visible).
8.4.2
OCCUPANCY
_
MODE
_
EDITION (Register 41707, bit 1)
Bit 1of register 41707 determines whether OCCUPANCY_MODE is editable locally from the
Room Panel. When the bit is
“true”
, the Occupancy Edit Submenu is active and the user can
set Occupancy Mode. When the bit is
“false”
, the Occupancy Edit Submenu is inactive. The
default value is 1 (Occupancy Mode is editable).
8.4.3
EDIT_MODE (Register 41707, Bit 5)
Bit 5 of register 41707 switches between Occupancy Normal Edit and Occupancy Fast Edit
modes.
In unoccupied mode the human symbol
stays outside of the house symbol
In occupied mode the human symbol stays
inside the house symbol (if Forced
occupied mode human symbol blinks
inside the house)