iSMA-B-MAC36NL User Manual
Version 1.4
www.gc5.pl
Page 21 / 51
Fill the fields in the Open Platform window as follows:
Type
—
Select Image Platform Connection, if not already selected.
Note: Workbench may default to a secure Image Platform TLS Connection. If so, for any new
controller, change the type to a regular (non-TLS) platform connection. After conversion, you
should always use the recommended TLS platform connection.
Host
—
Leave at default IP, and type in the default IP address of the new controller (the default
IP address is 192.168.1.123).
Port
—
Leave at default 3011.
Credentials:
Username
—
Type in the factory default User name (tridium)
Password
—
Type in the factory default password (niagara)
Click the OK button to accept all settings.