iSMA-B-MAC36NL User Manual
Version 1.4
www.gc5.pl
Page 34 / 51
Figure 31. Top cover
After removing the cover, the side panels will be two dipswitches and two rotary switches.
Looking at the description on the right you have information about the function of the switch
6 in the S3 dipswitch. Switch 6 in dipswitch S3 is used to perform the function of restore
factory settings.
Figure 32. DIP switch view
The sequence of restore factory settings is as follows:
1.
Disconnect the power supply from the controller
2.
Pull up the switch 6 in the S3 dipswitch to the ON position (up)