iSMA-B-MAC36NL User Manual
Version 1.4
www.gc5.pl
Page 45 / 51
Figure 39. Screensaver view
The slots assigned with the Screensaver mode:
1.
Standby Enabled - this slot switches on or switches off the Standby mode („true”- mode
enabled, „false”- mode disabled). By default the Standby mode is active.
2.
Standby Time – this slot contains the time value in hh:mm:ss format. This time starts
counting down when there is no user activity on the display (no touch). When the time
elapsed the display goes to the Standby mode. The default value is 5 minutes.
Auto Login function
Due to the user's requirement to login after a power outage and to ensure better ease of use
of the HMI panel, the Auto Login function was created. Thanks to this function, after each
power failure, the browser automatically login the user and launches the start page according
to the navigation file assigned to the user.
To start the auto-login function:
1. Enter the name of the existing user with Config\Services\UserServices in the Auto Login
Credentials\Username slot which will be used for Auto Login function.
2. Enter the password entered the user in the Auto Login Credentials\Password slot.
3. Activate the Auto Login function in the Auto Login slot (switch to true).