iSMA-B-MAC36NL User Manual
Version 1.4
www.gc5.pl
Page 47 / 51
4.
Disconnect power supply from iSMA-B-MAC36NL controller.
5.
Connect the iSMA-B-MAC36NL controller with the panel HMI as in the above diagram.
6.
Connect the power supply to the iSMA-B-MAC36NL controller and the panel HMI which
will cause the panel to be detected by the controller.
Note: Connecting the panel to the HDMI port during power will not detect it.
7.
During startup the controller (platform/station) and if the HDMI service is not configured
in the running station, the following image will be visible:
Figure 40. No HDMI service view
8.
After starting the station with the configured HDMI service, the Login window will appear
as shown below: