16
BATTERY INSERTION
The batteries are normally already inside the camera, protected by special insulating tabs. Remove
them before using the camera. We recommend the first time to power the camera via a 5Vdc adapter
normally used for smartphones, for about 10-12 hours. The average battery life is about 3 months
(use in normal lighting conditions with an average of 10 daily live connections).
Note: the duration of the charge may vary depending on the number of detections performed at
night (due to the switching on of the IR LEDs) and the ambient temperature. Autonomy decreases
as the ambient temperature decreases.
SWITCHING ON AND STARTING THE CAMERA
Move the ignition switch to ON. After the start-up procedure, a Blue Led will flash on the front of
the camera. It will remain flashing for 2 min. around, period during which it will be possible to
associate the camera to the router.
If you did not have time to connect to the router within this period, the Blue LED would go out.
To reactivate the LED and re-set the Camera to the connection, press the Reset button with a click.
Proceed to connect the camera to the 2.4GHz Wi-Fi router using the Hey Smart app.
