ISO PREFERRED, 1419 DONELSON PIKE, SUITE A, NASHVILLE, TN 37217
ISOPREFERRED.COM
jljlkjljljlk
ISO Preferred Stable & Secure Ankle Brace I (AN34x)
is intended for the support of mild to moderate
ankle distortions. Tibialis, Tendinitis, Osteoarthritis of ankle and foot, Chronic ankle instability,
Tendinopathy of foot and ankle; Prophylactic and therapeutic use in sports activities. Rupture- tendon
of the foot and ankle, non-traumatic. Acquired flat-foot or pronation of the foot/ankle.
Stable & Secure Ankle Brace I
The
ISO Preferred Stable & Secure Ankle Brace I
reduces the time it takes
to heal discomfort from injuries or post-surgery. Please follow your
orthopedic professional’s instructions explicitly and adjust or discontinue
use only as directed to achieve maximum benefit for your concerns.
Always Putting Our Patients First
1
. Disengage all fastener straps and connections. Open and separate the top plastic strap
system.
2. While seated, place the injured foot/ankle into the brace slowly in the same manner that
you would put on a shoe. Position your heel so that it is resting snugly up against the back
of the soft interior liner.
3. Fasten the top section of the ankle brace by tucking the side with the toothed strap
underneath the other side and slide the toothed strap through the hole in the overlaying
strap. Before applying the fastener straps into place, make sure that the rigid plastic is
centered over each equally.
4.
Fasten the straps into place. Make sure the ankle brace feels securely in place and that
little movement can be achieved.
5. Simultaneously and equally pull both the straps that are attached to both sides of the
laces that run through the padding atop your foot. Once you are comfortable with the
snugness of the brace, attach both fastener strap pull tabs to the soft liner. Make sure the
brace feels secure and is centered to both sides of your ankle.
DO NOT OVERTIGHTEN
.
3
2
4
5
2
1
