background image

IDM 98III / 99III English

IDM 98III / 99III English

16

17

Low battery and Battery Replacement

Replace the battery as soon as the low battery indicator appears to avoid 

false reading.

Refer to the following figure to replace the batteries

SECTION 5 - SPECIFICATIONS

General Specifications

Maximum voltage applied to any terminal

 : 1000 Vac rms or 1000 Vdc. 

rms

Display

 : 6000 counts. 

Polarity Indication

 : Automatic, positive implied, negative indicated.

Overrange Indication

 : OL

Batteries Life

 : 150hours alkaline battery (No backlight)

Low Batteries Indication

 : Voltage drops below operating voltage, “ ” 

will flash.

Power Requirement 

: PP3 9V battery

Auto Power Off 

: 20 minutes.

Operating Temperature

 :  -10 ~10°C

 

10°C ~ 30°C (

80% RH), 

 

30°C ~ 40°C (

75% RH),

 

40°C ~ 50°C (

45%RH)

Storage Temperature

 : -20°C  to 60°C , 0 to 80% R.H. (batteries not 

fitted)

Temperature Coefficient

 : 0.15 x (Spec.Accy) / °C, < 18°C  or > 28°C .

Measure

 : Samples 3 times per second .

Altitude

 : 6561.7 ft (2000m)

Safety

 : Complies with EN61010-1, UL61010-1,IEC 61010-1, CAT IV 

600V, CAT III 1000V

Measurement 

Category

Application

I

Measurements on circuits not directly connected  

to mains. Examples include: Measurements on battery 

powered equipment and specially protected (internal) 

mains-derived circuits.

II

Measurements on circuits directly connected to the 

low voltage installation. Examples include: Household 

appliances, portable tools and similar equipment.

III

Measurements performed in the building installation. 

Examples include measurements on distribution 

boards, junction boxes, socket-outlets and wiring and 

cables in the fixed installation.

IV

Measurements performed at the source of the low-

voltage installation. Examples include measurements 

on primary overcurrent protection devices and 

electricity Instruments

Weight

 : 460g (including battery)

Dimensions (W x H x D)

 : 94mm x190mm x 48mm with holster.

Pollution degree

 : 2 

EMC

 : EN 61326-1  

Shock vibration

 : Sinusoidal vibration per MIL-PRF- 28800F   

(5 ~ 55 Hz, 3g max.)

Drop Protection

 : 4 feet drop to hardwood on concrete floor.

Indoor use only.

Summary of Contents for IDM 98-III













Reviews: