iSocket
®
GSM 706/707
www.isocket.eu
© Copyright Intellectronics 2012
All rights reserved. Version 1.1.2-EN
- 20 -
English
9.3 Alarm Logs
You can read alarm logs which record sensor activity. The device keeps the last 10
events sorted by time. One of the simplest ways to use this feature is to monitor people
entering the room (when room was visited).
Command
Description
Response
Type
SHOWALARMLOG
Show alarm logs
yy/mm/dd:hh:ss
Ctrl
9.4 External Sensors Scheme
The sensors are connected using a 3.5mm mini-jack. Do not insert or eject the jack on
an operating device! Before you insert or eject the jack you should switch off the device.
You can connect several sensors in parallel, but the sensors will not be recognised
individually. You can find various sensors on the market: motion, door opening, fire,
smoke, gas or water leak, etc. Refer to our website www.isocket.eu for information about
sensors. The total power consumption of the sensors connected should not exceed
300mA. We recommend that you only use approved sensors, failing which we will not be
held responsible for the operation of the device.
GND
Alarm
+12VDC/300mA
Splitter
9.5 Microrelay Scheme
Microrelay designed for switching of external electrical contacts.
It can switch 24VDC / 2A max.
Connectors and sensors are not supplied with the device. These can be bought directly
from us or our dealer network.
10. Microphone and Room Listening
The features described in this chapter are not available on the "Light" models.
Please note that the illegal collection of information is prohibited in most countries. The
microphone feature may only be used for lawful purposes. For instance, you can use the
device as a remote listening station. If this device is installed in a room and the alarm is
triggered in your absence, you can call the device and listen to sounds emanating from
the room. Each time the device calls you (for example, sensor triggering) the
microphone is activated when you pick up the handset.
Command
Description
Response
Type
MICLEVEL=15
Setup mic level (value from 0 to 15)
MICLEVEL=15 – OK 30min
MICLEVEL?
Inform about MICLEVEL value
MICLEVEL=15
Inf
CALLBACK
If you send this SMS to the device, then it will call you
back. This is convenient if you do not want to spend
money on your own number. The device hangs up after
about 30 seconds if you not pick up the phone
Call-back to your
number if it can be
recognized
Ctrl
Remember that you are not able to execute CALLBACK if the security number list or
password protection is not configured (Chapter 5.1, 5.2)
Summary of Contents for GSM 706
Page 1: ......
