www.MainResource.com
800 362-6740
Your source for Refurbished Isoetec Equipment
2 of 7
Station Speed Dial
To program:
•
Press the “PROGRAM” key.
•
Dial one of the 12 access codes where you wish to store your outside number.
•
Dial the outside number (up to 16 digits) you wish to store.
•
Enter a pause between digits by pressing the volume up key.
•
If you need to enter more than 16 digits, after the 14
th
digit, press the volume down
key and a second access code.
•
Press “PROGRAM” again, dial the second access code and dial the remaining digits.
The number sequence will be automatically chained.
•
Press “PROGRAM” to end.
Placing a Call
Inside Calls
•
Pick up the handset or press the “HF” key.
•
When you hear the dial tone, enter a 2-digit extension number or use a programmed
DSS key for the party you wish to call. To ring the party, dial “1” plus the 2-digit
number.
•
Replace the handset or press the “HF” key to end the call.
Outside Calls
•
Pick up the handset or press an idle “LINE” key. For hands free operation, press a
“LINE” key without lifting the handset.
•
Dial the phone number or use speed dial.
Using Station Speed Dial
•
Press an idle “LINE” key.
•
Press the “PROGRAM” key when you hear the dial tone.
•
Dial the access code for the stored number.
Using System Speed Dial
•
Press an idle “LINE” key
•
Press “*” when you hear the dial tone.
•
Dial the 2-digit code corresponding to the access code of the number you wish to
dial.
Redial
•
Press a “LINE” key.
•
Dial “#” on your keypad.
