Output Fuses
All five frequency indicators flashing simultaneously indicates that the output fuse
for that channel has blown. Check that the connected equipment functioning
correctly and are appropriate for the PowerStation’s output capacity. Fuses can
also age and occasionally fail unexpectedly. Turn off the PowerStation using the
rear panel switch, disconnect from the supply and replace the appropriate fuse
with one of an identical type.
WARNING! Failure to replace the fuse with the same type and rating
will invalidate the warranty and may result in an electric shock and/or
fire hazard.
If you are in any doubt about any aspect of installation or operation, please consult
your dealer, a qualified electrician or contact ISOL-8 directly for advice.
Cleaning
Dust the unit regularly with a soft cloth or soft brush. For more stubborn marks
use a slightly damp cloth with a very small amount of mild detergent such as
washing up liquid.
Do not use a wet cloth. Other cleaning or polishing agents should not be used.
Never use abrasives or alcohol based agents, they will harm the surface finish.
Do not allow the unit to become wet when cleaning.
Specification (
subject to change)
Number of outlets:
2 (1 per channel)
Dimensions:
445*145*420mm (W*H*D)
Weight:
19Kg
Input Voltage:
200-260VAC
Standby power consumption:
6VA
Maximum power consumption:
350VA (Full load)
Output voltage:
2/- 10%
Output frequency:
50, 60, 67.5, 81 and 100Hz
Output frequency accuracy:
+/- 0.05%
Fuses
Outputs 1 & 2
3.15A T Ceramic 20mm fuse
Mains Input:
3.15A T Ceramic 20mm fuse
