background image

Returns

Should it be necessary for your 

 to be serviced, please send it in the 

original packaging to your dealer. If this is not possible please contact us to obtain 
a Return Authorisation Number. Returns without this number will not be 
accepted. If it is not returned to us in its original packaging, ISOL-8 reserve the 
right to make a nominal charge for packaging by return.

Disposal and Recycling  

At the end of the units working life it must be disposed of correctly. It is made to 
the highest standards with materials which can be recycled wherever possible. Do 
not dispose to landfill, contact your dealer or ISOL-8 for information regarding 
return for correct disposal.

Declarations

Information given in this document is correct at the time of printing. Our policy of 
continuous development means any changes might not be indicated in the 
specification.

This product is guaranteed against defects in material and workmanship for 5 
years from the date of purchase in the UK only. Proof of purchase is required.
The Guarantee is not transferable and is offered to the original purchaser only. 
This guarantee does not limit your statutory rights within the country of 
purchase.

The PowerStation records operational data for factory fault finding. Failure to 
comply with any of the above instructions during installation or operation will 
render the manufacturer’s warranty null and void.

Marking by the “CE” symbol indicates compliance of this device with the EMC 
(Electromagnetic Compatibility) and LVD (Low Voltage Directive) standards of the 
European Community

          

PowerStation

Summary of Contents for PowerStation













Reviews: