114446 | Sys-Pro dynamic white 4 zones remote control with 3
scene memories
Mechanical Structures and Installations
Operation
●
When turn on light, the indicator display blue. when turn off light, the indicator display red.
●
When touch the color wheel
,
the indicator will display the same color.
●
When press or touch operation is invalid (If the light is off), the indicator display red.
●
To extend battery life
,
no touch or press key operation after a few seconds
,
the touch wheel will enter sleep state, you need press any key to make touch wheel quit sleep state.
Match Remote Control (two match ways)
Use the controller’s Match key
Match:
Short press match key, immediately press zone on
key of the remote.
Use Power Restart
Match:
Switch off the power, then switch on power again,
immediately short press zone on key 3 times on the remote.
The light blinks 3 times means match is successful.
.
Delete:
Switch off the power, then switch on power again,
immediately short press zone on key 5 times on the remote.
The light blinks 5 times means all matched remotes were
deleted.
Delete:
Press and hold match key for 5s to delete all match,
The light blinks 5 times means all matched remotes
were deleted.
End user can choose the suitable match/delete ways. Two options are offered for selection:
53
.5
0 m
m
Back holder with magnet
To �� the remote� three options are o��ered �or selection�
Option 1: stuck the remote on any metal surfaces directly.
Option 2: fix the remote' back holder on the wall with two screws.
Option 3: adhere the remote' back holder to the wall with paster.
43.00 mm
15
5.
00 m
m
17.50 mm
3VDC(AAAx2) Battery
RS1,RS2,RS6 Touch Wheel RF Remote Controller
User Manual Ver 1.0.2
www.iskydance.com
Page 2
