__________________________________________________________________________________
5 |
P a g e - S e i t e
DO NOT TOUCH!
Never touch surface of product during
operation or when ready for use! No needles
or comparable parts to be injected into the
product! This leads automatically to damage
of heating conductor or other electrical parts
and protection devices! Perilous injuries can
result from this type of misuse.
ATTENTION! HOT!
These products contain electrical heating
elements. Never touch in case of hot surface
of the product or when the product is in
operation. This affects also all metallic parts,
which can reach high temperature during
operation. There is danger of combustion.
INFLAMMATION AND EXPLOSION RISK!
The product is not explosion-proof. It should
never be integrated into tempering processes
where liquids handled may support
explosions. This covers also applications
where gas/air-mixtures may occur. The
product must not be used to heat explosive
media or those developing explosive gases
when heated. The product must be installed
only outside of hazardous locations.
General Product Information
The products consist of woven fabric insulated
heating cables for industrial use. Depending
on the requirement they are designed with
the following features:
- Multiple layers of Glass-fiber fabric
Insulation
- Multiple layers of Silica-Glass-fiber fabric
Insulation
- Woven structural braids
- Layers of metallic braid
- Additional temperature sensors and/or
thermal protectors
- Additional controllers
- various operating voltages and
performance ratings
They are used to heat-up, maintain and
compensate heat losses on small or large
objects, pipes, apparatus, laboratory
equipment, etc. The maximum admissible
product temperature varies in design and in
the different insulation material. The
maximum achievable withstand temperature,
however, depends on the specific operating
conditions. It may be influenced by the heat
conductivity of the materials and media to be
heated as well as by the throughput, the
ambient temperature, the insulating material
and the insulation thickness. ISOPAD offers a
standard range of different versions but also
versions tailored (manufactured to desired
length) individually to the application.
Note:
For individual specifications please refer to
the product label or type plate. In the case of
installation difficulties or special requirements
it is recommended to discuss and agree
suitable installation procedures. In case of
doubt or if necessary please contact us. (see
last page for contact information)
Additional Safety Instruction
(product related)
Attention!
When using electric surface heating
equipment, basic safety precautions should be
followed in order to prevent the occurrence of
burns, electric shock, fire or injury to persons
or animals.
The following safety notes have to be
followed:
- The products are not suitable for use in
applications where they may be subject to
aggressive chemicals.
