ORIGINAL INSTRUCTIONS
In versions with endothermic engine, near the accelerator there is the
symbol that explains the operation of the accelerator lever.
Close to the endothermic engine commands there are the symbols for
switching off, the fuel tap and the starter commands .
For more information about the commands of the engine you should
consult the manufacturer's manual.
3.3
General description
The Power trowel for concrete pavements
L030001
is designed and
built for the smoothing of concrete substrates. The rudder for steering
can be folded to reduce the encumbrance of the machine. During
smoothing operations, the tools, consisting of 4 blades, follow a rotary
movement with vertical axis. The blades are equipped with screw-down
device for adjusting the angle of the blades, thus allowing
different kinds of processing on concrete with different degree of
humidity and therefore hardness.
The machine is particularly suitable for smoothing of concrete substrates
for laying of hardwood floors, linoleum, carpeting and the preparation
of wear resistant surface. Particularly suitable to operate inside
apartments, garages, on sidewalks and small courtyard areas.
The idle upper disk allows to almost reach the walls of the room in
which you operate with smoothing blades, without damaging either the
15
Endothermic engine
The endothermic engine emits exhaust gases harmful to health.
Avoid using it in closed or poorly ventilated environments.
