ORIGINAL INSTRUCTIONS
16
Misuse and misapplication
Use is prohibited to children under 18 years and persons incapable
of understanding or with mental health problems. The Power
trowel for concrete pavements
L030001
is designed and
manufactured for the use specified above; a different use and non-
observance of the technical parameters laid down by the
manufacturer, may be a condition of danger for users or third
Blades
For this type of machine only finishing blades are provided; these are
fixed by simple screws.
Finishing blade:
built with special carbon steel is suitable to perform the
last step to get an optimal smoothing. It is recommended that you use it
after smoothing the surface previously with the smoothing or substrates
disc.
Smoothing disc
It is built in anti- wear steel is suitable for running of the first steps as a
plastering trowel; It must be applied over the blades of the machine and
is dragged by them in rotation thanks to special joints: so preparing the
surface to further steps with other blades. It also provides some
protection against wear of the blades during machine movements on the
ground.
It can be required in galvanized version or for substrates.
Moving
The machine can be dragged to the ground, preferably with the
smoothing disk mounted, with one or two people who can grasp by the
front handle and by the rudder. It is also possible to use a special lifting
machine with a chain attached to the handle and the rudder.
To make movement more convenient it is possible
to fold the rudder on itself, unlocking the handle
shown in the picture on the side first.
