ORIGINAL INSTRUCTIONS
A finishing blade is available: built with special carbon steel is suitable
to perform the last step to get an optimal smoothing. It is recommended
to use it after smoothing the surface previously with the smoothing
disk.
1.
Overturn the shutdown machine so that
the blades are easily accessible.
2.
By unscrewing the screw 67 on each
blade, these can be removed from the
machine.
3.
Place the new blades and secure them
with the screw 67.
•
Finishing blade: it can be used on both sides, so it is recommended
that you use them both before replacing it
•
Smoothing disk: it is mounted under the blades and dragged in
rotation by 4 large hooks . Make sure that the blades are inserted
into the hooks before starting work.
36
