ORIGINAL INSTRUCTIONS
7.
After work is finished, stop the engine, move the machine away
from the floor just finished and provide an accurate cleaning of the
blades.
6.9
Washing and cleaning
It is essential to wash the blades and the grid immediately after use to
prevent concrete tracks can scale on metal parts. So with the machine
turned off it is necessary to wash with copious amounts of water the
parts dirty of concrete, especially the underside of the blades. At the
end of the cycle dry as much as possible the machine to avoid possible
corrosion starts.
In order not to damage or impair the functioning of the various
components, especially of electrical parts, the external cleaning of the
rest of the machine must be done with a rag or a bucket and a sponge. It
38
Injury hazard
While the engine is running hold the handles with both hands.
Keep the power trowel running away from your body and from
other people.
Do not touch the silencer and the engine at the top of the power
trowel when the engine starts and immediately after switching
off: these parts reach high-temperature!
Always switch off the engine before cleaning and inspection.
Injury hazard
Cleaning must be performed with the machine turned off.
In case of inclination of the machine to clean the underside of
the blades, make sure to support it so that it cannot fall.
Do not touch the silencer and the engine at the top of the power
trowel, immediately after switching off: these parts reach high-
temperature!
