ORIGINAL INSTRUCTIONS
maintenance, since these operations will be done always and exclusively
by the customer service staff of
Isoplam
S.r.l.
Moreover this manual, does not speak about the endothermic engine
maintenance, explained in the manufacturer's manual.
The Customer Service is able to provide all information and to respond
to all requests to treat and maintain concrete floor power trowel
L030001
perfectly efficient.
In case of installation of non-original parts the guarantee loses validity!
7.2
Maintenance and checks before each use
7.2.1
Control of the labels and pictograms
Check the readability and the presence of the CE label and warning
stickers applied to the power trowel bodywork.
7.2.2
Operating control
1.
Check proper operation of all parts of the power trowel; in particular
of use and emergency commands.
2.
Also check the tightening of all bolts of the machine, in particular
those of the guards of the transmission belt and blades.
3.
Check the wear of the blades and of the protection grid.
4.
Check the possible presence of foreign bodies on the blades.
7.2.3
Refuelling
1.
Unscrew the tank cap by turning it counter-clockwise, then remove
the cap.
2.
Check the fuel level.
3.
If the fuel level is low, refill the tank with unleaded petrol.
4.
Completed refuelling, screw the fuel cap and make sure it is closed
properly.
