ORIGINAL INSTRUCTIONS
7.3
Control of transmission belt
The drive belt is located behind a plastic cover to protect it from dust
and dirt, located in the left front of the machine. The toothed belt is
tensioned automatically when inserting the centrifugal clutch.
Every 50 hours of work check the status of the belt that must not have
frayed, damaged parts and small missing pieces and, if necessary,
contact the customer service for replacement.
41
Danger of burns
During refuelling:
Stop the engine;
Do not approach naked flames or other heat sources.
Do not smoke.
Contact/inhalation hazard
During refuelling, avoid repeated or prolonged contact with the
skin and avoid inhaling vapours.
Safety during maintenance of the
machine
Before starting any intervention on the belt, completely turn off the
machine and insure against accidental ignitions. Put the machine in
a stable position, resting it on the ground.
