14
The STERIL CABINET 100 model appliance including various accessories, supplied with adjustable feet, is ready to be
connected to the electrical network, referring to what is indicated in the following paragraph, connection to the electrical
network.
CAUTION! CHECK THAT THE LICENSE PLATE DATA IS COMPATIBLE WITH THOSE OF THE PO-
WER
SUPPLY LINE OR ELSE THE PRODUCT MAY BE DAMAGED
Before proceeding with commissioning, the accessories supplied separately from the cabinet body must be installed
•
9 x 25W UVC lamps
•
3 grids for internal shelves depending on the configuration
as seen in the image below.
Both types of grids are installed by resting them on angles that fit at the desired
height on the vertical racks, in the four corners of the compartment dedicated to
the grids. From the front the grids are inserted on hooks which force their
position.
On the upper part of the wardrobes there is also a tube that acts as a clothes
hanger or other accessories that need to remain hung.
Whole grids to be used without central divider
COMMISSIONING STERIL CABINET 100
25 W UVC lamp
positioned 3 horizontally and 3 vertically from the inside of the
door hinges.
The assembly of each lamp takes place as for a common neon
tube, after inserting it into the feet it must be rotated 180 °
Half grids to be used on wardrobes with
central divider
The cabinet configuration and the number of accessories must be agreed upon when ordering. The indica-
tions in this manual are only for descriptive purposes for the assembly and use of the product.
vertical rack where the
supports of the grids are
positioned
Appendiabiti
