MEASUREMENT AND ASSEMBLY MANUAL
Validity of the manual: 1. 9. 2014
4
Then click the upper cover profile with the side covers into the basic profile holders; it must be kept in the plastic holder
and must be located symmetrically in the centre of the window.
•
secure the chain limiter; plastic windows and wooden Euro windows can only be secured into the glazing bar and the
holder for fixation of the lever must be mounted for the version with the lever.
•
check the function of the blind
ATTENTION!
Pursuant to the EN 13120:2014 standard, window blinds shall be installed in accordance with the
following instructions:
Chain:
If a breakaway coupler is used:
The chain length must be limited as follows:
1) If installation height (H0) is not specified, the chain length (H2) shall be less than or equal to 2/3 of the blind height
(see Fig.
): H2 ≤ 2/3 H.
2) If installation height (H0) is specified, the distance from the floor to the bottom part of the pull cord (H1) shall be at
least 0.6 m: H1 > 0.6 m.
A dangerous loop must be eliminated when a mass of 6 kg is applied or within 5 seconds of application.
