background image

 

  

INTRODUCTION 

Thank you for your purchase of the ISP Technologies Audio Transient Suppressor.  This 
product provides the user with the comfort of knowing that their speaker system is no 

longer in jeopardy.   The lingering pop noise that is heard when a system is powered 
on/off is a thing of the past.  Simply connect and let the unit do all the work.  
    

 

PRECAUTIONS 

NOTE:  IT  IS  VERY  IMPORTANT  THAT  YOU  READ  THIS  SECTION  TO  PROVIDE 
YEARS OF TROUBLE FREE USE.  THIS UNIT REQUIRES CAREFUL HANDELING. 

 
All warnings on this equipment and in the operation instructions should be adhered to and 
all operating instructions should be followed. 

 
Do  not use  this equipment near  water.   Care  should  be  taken so  that  objects  do not  fall 
onto and liquids are not spilled into the unit through any openings.   

 
The power cord should be unplugged from the outlet when the unit is left unused for a long 
period of time. 

 
DO  NOT  ATTEMPT  TO  SERVICE  THIS  EQUIPMENT.    THIS  EQUIPMENT  SHOULD  BE 
SERVICED  BY  QUALIFIED  SERVICE  PERSONNELL  ONLY.    DO  NOT  MAKE  ANY  INTERNAL 

ADJUSTMENTS  OR  ADDITIONS  TO  THIS  EQUIPMENT  AT  ANY  TIME.    DO  NOT  TAMPER 
WITH INTERNAL ELECTRONIC COMPONENTS AT ANY TIME.  FAILURE TO FOLLOW THESE 
INSTRUCTIONS  WILL  VOID  THE  WARRANTY  OF  THIS  EQUIPMENT,  AND  MAY  CAUSE  A 

SHOCK HAZZARD. 
 

THERMAL CONSIDERATIONS 

 

This system generates heat that must be dissipated in order to maintain reliability and 

insure  the  amplifier  components  stay  within  their  operating  temperature  specs.    To 
accomplish this, the amplifier is mounted onto a heatsink that is vented on the rear of 
the cabinet.  Airflow is forced through the fins via a fan that turns on when needed.  It 
is required that the vents remain free from any obstruction to allow proper ventilation 

to occur.  

  

In addition, the amplifiers are thermally protected internally via a thermal switch, which 
will  attenuate  the  signal  40db  when  the  temperature  exceeds  120

C.    When  the 

temperature drops below a predetermined point, full signal will be restored.  ISP tests 
have shown under extreme conditions that cycling will occur (40 sec. ON, 20 sec. OFF).  

Summary of Contents for Active series







Reviews: