Smaller microns allow fewer particles through, but to get most life and efficiency out of
your filters, it’s important to only go as small as you need. Differences in water quality
and your water pressure
affect the performance of
the WSP.
Please avoid the mistake of
using 'fine' filters for 'rough'
water, which will cause the
filters to clog sooner than
expected.
INSTALLATION
WHERE TO INSTALL
Install this filter in a place where it will be easy to access and maintain.
This product is NOT designed to be installed outdoors or in a place that is
exposed to direct sunlight.
The filter should not be exposed to freezing temperatures, overheating, corrosive
materials. If the product has to be installed outdoors, please create a weather proof
enclosure for the filter. Please note that installing the system in a place other than
recommended will void the warranty.
HOW TO INSTALL
To suit different plumbing sizes, the unit comes with two types of threads on both ends:
1 inch MNPT and ¾ inch FNPT. The flush out valve has a garden hose barb fitting.
The 1 inch MNPT may be directly mounted onto the 1 inch FNPT inlet port of a whole
house filtration system. It is recommended that you have an inlet valve and outlet valve
before and after the unit.
The WSP should be installed as a first layer of filtration for the water source before a
larger filtration system. The WSP-SL prevents scale and corrosion in your water supply
and should be installed after the water inlet to your water heater.
