background image

GB

Due to reasons of road safety, the driver`s seat must
only be adjusted when the vehicle is stationary !

Horizontal adjustment

Pull lever completely and move seat forwards/backwards.
Release the lever to lock the seat.

Lowering

Press button down:
Seat is lowered to the lowest position (easy off entry and exit). 
Press button up (when seat is lowered): Seat returns to
previously set position.

Shock absorber

By adjusting the damper, the suspension characteristics of the seat
can be optimally adapted to every roadway and every driver.
Lever up: minimum damper force - for flat roads.
Lever down: maximum damper force - for rough roads.

Height adjustment

Pull or push handle and adjust the seat to desired height.

Lumbar support/ Integrated pneumatic system

Press button to match the shape of the backrest individually to the
body contours.

Release swivel adjustment

Tip up switch and swing the seat. The seat can only be locked facing
the engine. Turn the seat slowly to the locking position, to avoid a
damage of the blocking catch and the stop.

Shoulder adjustment

Pull handle and adjust the upper backrest area in the desired position.

Backrest adjustment

Pull handle and adjust the backrest position by applying your
weight to the backrest.

Tilt adjustment

Pull lever and adjust the tilt by loading/unloading the front seat
cushion area.

Seat cushion adjustment

Pull lever and move the seat cushion forward/backward.
Release the lever to lock the seat.

Armrest

Lift up armrest a little and adjust inclination by turning the wheel.

Heating

Thermostatic regulated heating for seat cushion and backrest.
To be switched on resp. off by switch.

3-point-belt

Don't twist the seat belt when fastening.
Make sure that the belt tongue engages correctly in the belt buckle.
The belt has to rest close against the body.
When unfasten, guide the belt tongue back to the belt retractor.

Heating

Version 1

Version 2

Lumbar support (2 chambers)
Integrated pneumatic system
(3 chambers, IPS)

lower air chamber

upper air chamber

side support

(only IPS)

5

12

8

6

7

5

4

1

2

3

9

10

13

11

12

Illustration shows the lefthand version with maximum equipment
(controls 5-9 can be also on the right side)

1

3

4

5

6

7

8

9

10

11

12

13

2

7018409/Rev.15.10.2012

5

Summary of Contents for 6860/875









Reviews: