background image

T

he

 

reference

 

in

 

surface

 

TreaTmenT

www.istsurface.com

5

 

                                

DC/DCM100 to 330 Dust Collector - Instruction Manual & Parts

GENERAL SAFETY RULES

 

PERSONAL SAFETY

USE AND EqUIPMENT MAINTENANCE

  

KeeP WORK AReA cleAn.

• 

 

KeeP cHIlDRen AWAY.  

Do not let visitors come in contact with the equipment.  All visitors should    

be kept away from the work area.

 

GUARD AGAInST elecTRIc SHOcK.

  Non-skid footwear is recommended where damp or wet ground 

may be encountered. A ground fault circuit interrupter protected power line must be used for these 

conditions.

 

DReSS PROPeRlY.

 Do not wear loose clothing or jewelry. They can be caught in the moving parts. Wear 

protective hair covering to contain long hair.

 

USe SAFeTY eQUIPMenT.  WeAR SAFeTY GOGGleS

 or glasses with side shields. 

 

WeAR A DUST PROOF MASK. 

 

STAY AleRT. USe YOUR cOMMOn SenSe

. Concentrate on what you are doing. Do not operate the unit 

when you are tired or under the influence of drugs or alcohol.

 

DO nOT OVeRReAcH

. Keep proper footing and balance at all times.

 

beFORe cOnnecTInG THe UnIT to an electric current, make sure that the current is the same as

that indicated on the identification plate of the collector. An electric current higher than indicated

  that could seriously injure the user and also damage the collector. If you have any doubts, do not

  connect the unit.

 

DO nOT FORce THe eQUIPMenT. It will perform better and more safely if it performs his duties

 

the way it was designed.

 

USe OF AnY OTHeR AcceSSORIeS not specified in this manual may be dangerous.

 

DIScOnnecT THe UnIT on its maintenance.

 

DO nOT AlTeR OR IMPROPeRlY USe THe UnIT. These units are precision equipment. Alteration 

unspecified or modification can lead to a dangerous situation. Only a qualified technician should 

make all repairs (•), whether electrical or mechanical. Contact your nearest repair ISTblast service. 

Use only ISTblast original parts, the use of other parts carries a risk.

WARnInG

« READ ALL INSTRUCTIONS » Failure to follow the SAFETY RULES identified by a BULLET (

) symbol listed  

BELOW and other safety precautions may result in serious personal injury. 
 

« SAVe THeSe InSTRUcTIOnS »

Summary of Contents for ISTblast DC 100

















Reviews: