Earth
Safe
Carefully open the packaging.
Check the shipment for completeness (refer to the shipping documents).
Separate the packaging material and dispose of it in an environmentally
responsible way.
Danger due to rotor imbalance!
Always replace the complete set of rotor blades.
Risk of injury in case of assembly at windy sites!
Choose an assembly site which is sheltered from the wind.
The assembly process requires calm weather conditions.
Fig. 6:
Assembling the wind turbine
Repellerblatt (1) mit flacher Seite an Hub (2) halten.
Hold repeller blade (1) with flat side on hub (2).
With a M6x25 screw, nut and fasten one.
Screw on further M6x25 screws and hand-tighten.
7
.3
Unpacking the components
7
.4
Assembling the wind turbine
WARNING!
Translation of the original instructions iSTA wind turbine system
2
4
.0
7
.201
8
I00 1
5
of 2
8
Summary of Contents for Air Speed
Page 23: ......