BPU-124DE-SS
User’s Manual
Features of product ---
Frame: Aluminum body & aluminum material for the front bezel
Interface: Support SATA-I, II, III & SAS I, II
Form Factor: 1 x 5.25” Bay for 4 x 2.5” SAS or SATA Hard Drive(SSD)
High performance transfer rate up to SATA 6Gb/s & SAS 6Gb/s
Support RAID Function (Note: SAS or SATA RAID control card needed )
Plug & play, hot swappable and with 15pin power connector
Support 2.5” single hard drive up to 14.5mm thickness in height
Built-in 2 X 4cm(4020) cooling fan and the with mechanical lock on the front tray
LED for Power & HDD access and LED enable/disable Switch
---Solid HDD tray with strip-heat ventilating holder(picture A1) ---
HDD Installation:
For 2.5” SATA or SAS HDD (SSD):
Put HDD onto the tray as shown on Picture A-1 and use the provided screws to
mount & secure HDD on the tray for each of the four.
---Safety Lock---
The mechanical lock design keeps each HDD staying inside of the unit and prevents
HDDs being taken out while they are in operation (See Picture B1 & B2.)
Picture B-1
Picture B-2
Picture A-1
