SAFETY
1
SAFE PRACTICE AND SAFETY RULES
To guarantee your safety, please cooperate with the company at all times and obey the safety rules detailed here
to help ensure that accidents are avoided. (Article 29. Safety at Work Act). The following list of obligations shall
be respected by all workers carrying out work whether directly employed by ISTOBAL or subcontracted.
•
Please make proper use of the personal protection equipment provided.
•
Follow the instructions of your superiors, and any indications given by the person responsible for the
facility.
•
Keep tools and personal and collective protection equipment in good order. If you observe any deterioration
in them, advise your superior immediately.
•
Keep the work site clean and tidy.
•
Advise your superiors and colleagues of any danger or risk that you perceive on the facility. In case of
serious and imminent risk, do as indicated above while also ceasing to perform any activity which may add
to such risk.
PREVENTIVE MEASURES
ISTOBAL, S.A. personnel and workers subcontracted by the company are to take into account the following
preventive measures while carrying out work:
•
Hand-held ladders are not permitted for performing jobs. For work where use of a scaffold is not physically
possible or where its use would be an added risk, a platform step ladder is to be used.
•
If a certified scaffold is used, follow the manufacturer's assembly instructions closely. Make sure it is in
perfect condition before use. Do not place it near power lines. If the scaffold is moveable, put the brakes on
all the wheels and use securing bars to stop it moving unexpectedly. Do not move the scaffold with workers
on it. Do not leave tools or materials lying around on the scaffold.
•
If a platform step ladder is used, it must only be used by duly trained and authorised personnel. Make sure
that it is used in accordance with the instructions supplied with it.
•
All waste generated is to be collected and removed from the work area as and when it is generated. The
work area should be kept as clean as possible at all times.
•
Make sure the work area is organised - do not leave materials and tools lying around as these could cause
accidents.
•
When materials are being loaded and unloaded with winches / cranes; materials are being lifted; heavy parts
are being mounted, etc., make sure there are no workers underneath. Check this before starting to move
anything.
CONDUCT ON SITE
•
Station your vehicle in designated parking zones. Turn off the engine. Parking is not permitted in classified
areas or where the vehicle would obstruct the passage of persons or vehicles.
•
Inform the supervisor or person responsible for the facility of the presence of the vehicle and why it is
there.
•
Before starting work, put up signs and cordon off the areas where you will be setting up equipment such as
winches, compressors, etc.
•
After the work is completed, remove leftover waste from the work area, such as plastic, cardboard, wood,
etc.
•
Collect your tools and other equipment.
•
Inform the Supervisor or person responsible for the facility that the work is completed and what the situation
is now.
3
GB
CIVIL WORK AND INST
ALLA
TION
Summary of Contents for Twash 4TA6000
Page 28: ...28 GB WITH ENCLOSURE CM 6 6 1 Adjoining bays...
Page 35: ...35 GB CIVIL WORK AND INSTALLATION Note DETAILS 7...
Page 40: ...GB 40...
