background image

L

eader

 

in

 

spray

 

booths

paint

International

Surface

Technologies

i s t s u r f a c e . c o m

ISTp

aint

 would like to thank you for your recent purchase of our product line. Please complete the card below 

and either mail or fax it to our office so that we may start the warranty of your product and keep you up to 

date on the EPA regulations by fax. Again, thank you for your purchase and if you have any suggestions or 

comments, please feel free to contact our office.

COMPANY NAME :   |__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|
ADDRESS : |__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|
CITY :   |__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|       STATE/PROV. : __|__|__|__|__|__|__|__|__|__| __|__|__|__|
COUNTRY :   |__|__|__|__|__|__|__|__|__|__|__|__|__|       POSTAL/ZIP CODE : |__|__|__|   |__|__|__|
CONTACT : |__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|
TEL. NUMBER:  |__|__|__|   |__|__|__| - |__|__|__|__|   FAX NUMBER:   |__|__|__|   |__|__|__| - |__|__|__|__|
PURCHASE FROM:  |__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|
DATE OF PURCHASE:     |__|__|    |__|__|    |__|__|__|__|
     

          Month    Day          Year

SERIAL NUMBER:  |__|__| - |__|__|__| - |__|__|__|__| 

     MODEL NUMBER:   |__|__|__|__|__|__|

TYPE OF 

FLUID USED: 

|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|

Which factors most influenced your decision to purchase this ISTp

aint

 unit?

SUGGESTIONS ABOUT THE EQUIPMENT: 

IMPORTANT!   Please complete and return within 30 days after purchase to activate the warranty.

PLEASE  SEND THE COMPLETED FORM VIA EMAIL OR FAX TO :

INFO@ISTSURFACE.COM OR 450-963-5122

WArrAnTY regisTrATion

3 5 0 5 0 0

Summary of Contents for GWMA 500

















Reviews: