10
4 BEGIN TO USE
4.1 Install SIM Card and Battery
Please be sure to disconnect the phone with the adapter before
disassembling the battery.
This version is a dual-card dual-standby phone which can be inserted
with 2 SIM cards. Both SIM cards can register onto an identical network.
Each SIM card is included in the socket generally. The SIM card 1 is
inserted in the Socket 1 and SIM card 2 in Socket 2. You should be
careful to use, insert and disassemble the SIM card because the
contact of the SIM card is easy to be scraped or bent to damage.
1.
Disassemble the battery cover.
2.
Disassemble the battery.
3.
Slide the SIM card into the socket.
4.
Insert the battery.
5.
Cover the battery.
4.2 Charge the Battery
The phone will release the warning tone displaying the insufficient
battery capacity with the indication of the empty battery icon when
the battery capacity is low. Under this case, the phone may not be
used in partial functions. The phone will power off automatically when
the battery capacity is too lower. Please charge the battery.
The battery icon on the screen will flash when the phone is being
charged. After completion of charging, the full battery icon will display
on the screen. The charging animation will be displayed on the screen
when the phone is being charged under the power-off state. After
completion of charging, the screen will display the prompt system of
finishing charging. Under the standby mode, it takes 2-3 hours to
charge the battery.
