Device overview
The
top face
of the Galvanic Isolation Adapter features:
A
– DEBUG TOOL connector.
B
– TARGET connector.
C
– LED lights indicate power supply status.
If LEDs on the GI Adapter are
OFF
, immediately turn everything
OFF
!
The
side face
of the Galvanic Isolation Adapter features:
D
– USB-C Power supply socket (PWR).
Use only original iSYSTEM USB-C Power supply for powering and connecting with the GI
Adapter, otherwise the primary functionality of the GI Adapter would be counteracted.
E
– Debug interface (SWD, JTAG) selection.
Both jumpers (SW1, SW2) should be in the same position to achieve the desired debug
interface. The legend is printed on the housing.
