38
Insert the new lamp to the socket. Here again mind
the nib on the ceramic ring. It has to slip into the
recess in the lamp socket. Connect the plug to the
metal halide lamp.
Put the cover back on the housing, place the
crossdrive screws in the threads and tighten them.
After having replaced the 24W Metal Halide Lamp it
is necessary to execute a white balance as described
on page 40.
Cleaning the iTool
The iTool should be cleaned regularly.
For this always use:
- a soft an clean cloth or
- cotton swaps soaked with
- common dilution of water and
neutral ph-solution, non-detergent
I = ein
0 = aus
1
2
cut power supply
tighten screws
Online Store -
store.itcworld.de
Maintenance
