IMB222
Rev.4.05 May 2022
4
1 General safety rules
Before performing any operations on the device, read carefully the following
recommendations:
¤ Before hooking up the device, read the installation instructions given in this manual.
¤ To wire up the device, a proper wiring size must be chosen according to voltage and
current specifications found in technical data.
¤ The device is not equipped with an ON/OFF switch. Therefore, it powers up immediately
as soon as power is supplied to it.
¤ The device must be powered with DC voltage greater than 9V and lower than 32V. Higher
voltages will cause device failure while lower voltages will not allow the device to work
properly.
¤ Make sure that the working environment conditions falls within the range specified in
chapter
6 ‘Technical
data
’
¤ The device is not designed for operation in hazardous atmospheres (i.e., flammable or
explosive): its use in such conditions is therefore
prohibited.
¤ The device is intended for industrial use only. Do not use the device in situations where
compliance with strict safety precautions is required, such as applications directly or
indirectly correlated with medical equipment.
¤ The device must not be disassembled or repaired by unauthorised people. Contact your
local dealer for any repairs.
1.1
Recommendations for workers
When performing their tasks, workers should observe the following recommendations:
¤ Workers with specific qualifications for assigned tasks are required
¤ Workers must be authorised by the plant's owner/operator
¤ Workers must be familiar with federal/national regulations
¤ Before doing any action, workers must read and understand the instructions given in the
manual and the supplementary documentation (if available and depending on the
application)
¤ Workers must comply with the instructions and basic conditions
1.2
Typical applications
Typical applications include HVAC systems (heating, ventilation, and air conditioning),
agriculture, incubators, cold rooms, standard measurements, seasoning rooms etc.
¤ Only use this device in full compliance with the general conditions listed in this manual
and, if applicable, in the additional documentation.
Improper use:
Italcoppie Sensori s.r.l. is not liable in any way for damage or injury caused by
tampering, incorrect or improper use of the device.
1.3
Safety rules
Refer to the relevant regulations.
Read and carefully follow the instructions given in this manual
