This manual is the property of
. No part of it may be reproduced in any form.
LEONARDO SP instructions
Edition:
01/2018
- Revision:
00/18
3 - 01
MACHINE DESCRIPTION
Reasonably foreseeable misuse
The machine cannot be used:
- Outdoors and/or in places exposed to the
weather
- In places with humidity greater than 55 %
- In places subject to the presence of
corrosive
and/or abrasive vapour, fumes, or dust
- In places subject to a fire or
explosion hazard and anyway in places in
which the use of explosion-proof equipment
is mandatory
Machine equipment
The stretch wrapper robot is equipped as
standard with an electrical power cord to
connect the onboard battery charger to
the mains supply.
LEONARDO SP stretch wrapper robot
LEONARDO SP
is a self-propelled machine used for shrink wrapping pallets.
Operation of the machine is semiautomatic because film attachment,
detachment and cutting at cycle end are performed by an operator.
The machine is composed of a mast, machine body, two drive wheels, one
tracing wheel, steering rudder for manual mode operation.
The carriage is equipped with a mechanical brake for tensioning of the film
around the pallet.
A photocell mounted on the carriage detects the pallet height.
Limits of use
The electrical equipment is designed to operate in
environments
with temperature from
+5 °C
to
+40 °C
and with relative humidity of no more than
50%
at
40 °C
and no more than
90%
at
20 °C
.
The machine is not suitable for operation in
the presence of ionizing and non-ionizing radiation
(X-ray, Laser, Microwave, UV).
The machine must be stored within the
temperature range
-5 °C
to
+55 °C
.
Intended use
The maximum height of pallets the machine can wrap depends on the
machine model, as shown in the table below.
Model
Wrapping height
LEONARDO SP
2200
mm
LEONARDO SP 2700
2700
mm
