16
9.4
HOW TO USE THE MICROSCOPE WITH DENTAL MIRROR HOLDER
In the dental field the device with the appropriate accessories holder for dental mirror may
be used to perform visual examinations of the oral cavity, through direct analysis in real
time on the monitor or later through the analysis of the video and images captured and
stored via software.
In this configuration the microscope facilitates the dentist during the inspection of the oral
cavity allowing a better view and a better working posture and ergonomics.
Put the mirror into the holder microscope as described in Figures 4, 5, 6, ask the patient to
take a comfortable position and to remain immobile for the duration of the visit
•
Connect the microscope to the computer
•
Start the software DinoCapture (previously installed)
•
Choose image or video to capture
•
Zoom acting on the wheel to obtain the required size of the picture
•
Verify on the focus wheel the current magnification
•
Captures pictures or videos using microtouch
•
Move the device from the patient
•
Place the device on the support Amita (if present)
•
Tell the patient is able to move again
•
Move your mouse cursor on the picture preview just took the photo on the left
side of the screen (Picture 1)
•
On the top of the screen you can enter patient information and other notes
deemed necessary (Picture 2)
•
Click on Save as choosing the desired resolution (Picture 3)
•
Save in your computer using the coding system of the patient deemed
necessary (Picture 2)
•
To make measurements see Chapter 10
The device is intended for external use only
Do not enter the microscope in the oral cavity
Make sure that the holder has been regularly cleaned and disinfected before use
Do not to use the microscope simultaneously with the cleaning and dental
descaling
Do not make measurements in configuration with the support of the holder of
dental mirror as the reflection in the mirror is a projection of the real image.
Therefore, the measurements made on reflected images will be inaccurate
Summary of Contents for FEDMED100
