Mic-Fi Wi-Fi Microscope User Manual
page 35
P.s. The snapshot works only in WiFi mode.
8.4
Calibration
Select a known measurement standard as the to-be-observed object, such as a ruler, to be used for calibration.
Bring photo of the selected ruler into focus by turning the “Focus & Magnification adjustment wheel”, determine
the magnification by taking a reading from the scale on the focus dial as below(The default magnification is 60):
1)
Click on
1)
Fill the fields and ciclk on OK
2)
Drag the mouse to draw a line which has actual length.
3)
Select the calibration from this menu
Now the microscope is calibrate and you can mark measurements on the live video using the same focus. (
Please,
do not adjust the “Focus & Magnification wheel!”
). If the new photo object is not in focus, please only adjust the
distance between the microscope and the object until the image becomes clear
.
