ITALGI s.r.l. – DUPLA – Use and maintenance manual
10/28
Replace the filling container, keeping the shaped side on
the left side, as shown in picture.
Turn the handle [6] counter-clockwise to lift down the piston
[8] for some centimetres inside the filling container [7].
Turning the handle [6] into the horizontal position as shown
in the picture, to activate the automatic movement of the
piston [7].
Start ravioli machine pressing the button [P1], “START”,
untill you see, through the lateral fissure [11], some stuffing
coming out from the filling distributor.
As soon as you see the filling coming out, stop the machine
pressing the button [P3], “STOP”, to save from dirtying the
mould.
For the first use of the day, it is suggested to fill the
distributor before beginning to make ravioli.
This operation can be carried out by removing the mould,
place a container under the ravioli outcome and get some
filling coming out from the distributor, then stop the machine
and take away the filling from the distributor outlet.
In this away you will have an homogeneous outlet of the
filling from the different holes of the distributor and already
the first ravioli will have the same quantity of filling.
WARNING !!! If the filling dirties the mould’s
rolls, it won’t work properly! In this case it will
be necessary to take away the mould and
clean it carefully.
