PAMSPAN501x G.SHDSL.bis EFM Gateway
-
96
3.2.4.5
SHDSL
This option allows you to configure the SHDSL port on your router, Click on
SHDSL
Configuration
via the Advanced menu. The SHDSL Port Configuration page appears
promptly:
“Shdsl” is the default port name of SHDSL created in PAMSPAN501x where stands
for ATM/EFM port. You can configure simple SHDSL parameters in this page. The
procedure is shown as follows:
1.
In the Role drop-down list, you can set the device as CPE or CO.
2.
If to set PAMSPAN501x’s Wire mode, click on Wire Pair drop-down list to select
the Wire Pair number needed.
Wire Mode
DSL Pair to Use
Illustration
2-WireMode
1
4-WireMode
1,2
6-WireMode
1,2,3
8-WireMode
1,2,3,4
DSL
1 2
3 4
