30
OVER mA (2)
CONTINUE
OVER mA (2)
STOP
Pres START/STOP to start running according the
configuration set.
mA :00.0
12:00
PPM MODE
.
Doses in Parts Per Million
MENU SELECT
PPM
L/P W.METER
0.10
to select liters/pulse of the flowmeter.
Confirm with .
cc/ INJECTION
0,01
to select the injection volume/cycle
(ml/cycle) (page 5).
Confirm with .
SOLUTION %
100
to
select the concentration value (%) of
the product to inject.
Confirm with .
SET PPM
1.0
to select the set point in p.p.m (Parts
Per Milion), between 0,01-2000 ppm.
Confirm with .
START/STOP, to start running according the configuration
set.
PPM = 1.0
12:00
ALARM
Pump stops, yellow led is on, and the buzzer is activated when the pump detects
no injects product programmed (some parameters must be set). A flow sensor is
required.
MENU SELECT
ALARM
REF. PULSES
0
MAX DIFF.
0
number of reference pulses.
Confirm with .
select maximum distance of the ref
pulses accepted.
Confirm with .
to select
STOP or CONTINUE the
dosing when signal value is over SET mA
(2).
Confirm with .
Summary of Contents for Dositec mA
Page 1: ...DOSITEC ENGLISH ...
Page 2: ......
