MANUALLY OPERATION
5. MACHINE OPERATION
(2)Play recording to alarm: when you set the optional
switch at MSG, press play knob, it has a recording
sound output; press alarm mode and select longalarm
mode , press play knob again, then the recording will
be outputted repeatedly.
2 When the machine stands standby, you can't play
siren or recording manually.
.
AUTOMAITC MODE
(1)Play recording alarm : set the optional switch at
MSG , if there is a trigger signal being inputted in
the siren spigot at the real panel , then the output
spigot OUTPUT will output recorded signals , you
can press STOP to cancel alarm according to the
alarm mode by your command.)
(2)Play recording to alarm: when you set the optional
switch at MSG, press play knob, it has a recording
sound output ; press alarm mode and select long-
alarm mode , press play knob again , then the re-
cording will be outputted repeatedly.
Recording operation:
Before recording , you need erase the whole
recording, and then record,the detailed steps
are as follows:
1
.
When the machine stands in the state of working.
(1)Siren alarms : when you set the optional switch
at siren , press play knob , then it has a short siren
output;press alarm mode and select longalarming
mode,press play knob again,and it has a longsiren
output.
1 Siren alarms : when you set the optional switch at
SIREN,if you input a trigger signal in the siren spigot
at the real panel, and the output spigot won't output
siren signals till the trigger signal is relieved
.
(3)When you haven't cancelled the input trigger signals
in the alarm spigot at the real panel,and place the
optional switch at SIREN or MSG, you can get corresp-
onding input
2 When the machine stands standby, the STOP knob
can't work, others are as above.
.
1 Place the optional switch at LINE or MIC.
2 Press START and STOP simultaneously and
keep it for more than 3 seconds till the PLAY/
RECORD indicator light is ON simultaneously.
3 PLAY indicator light is ON and RECORD light
is OFF,it express finished the erasure and the
CMOS chip is empty.
4 According to the record audio,place the option
switch at the LINE AND MIC (make the switch
and channel relatively), and press the START
to startup record.At this moment, PLAY light is
OFF, RECORD light is ON.
.
.
.
.
5 CMOS chip is recorded fully or press the STOP
key,the RECORD light is off.The chip can record
one minute at the most.
6 After finish the record, make the option switch
turn to PLAY MSG to play.
.
.
7
